HISTORY PRODUCTS COMING SOON REVIEW AWARDS WORLDWIDE PROFESSIONAL USER TIPS CONTACT US
  : : HOME  >  REVIEW  >  STUDIO 9 SPECIFICATION
STUDIO 9 SPECIFICATION
The Studio 9 is a floor standing three way bass reflex system. Cabinet construction is of balanced veneer high density particle board with a medium density fiber board front baffle. Three circumferential braces strengthen the cabinet at critical points reducing coloration.

The two 165mm bass/mid drive units consist of a rigid die cast magnesium chassis with a low distortion magnet system. The polypropylene diaphragm with a natural rubber surround results in exceptional bass performance with a natural open mid band. Both units are active and crossover at 2.5 KHz to the 25mm soft dome tweeter. This has a vented voice coil former with ferrofluid cooling damping. A rear chamber loading lowers the resonance of the unit.

The crossover network is hardwired directly to the input terminals and utilizes air cored inductors with polypropylene capacitors. All internal wiring is of the highest quality oxygen free cabling soldered directly to the drive units.

System : Three way bass reflex
Frequency Reponse :45Hz~20KHz กำ 2dB
Bass / Midrange : 205mm polypropylene coned unit. Low distortion high flux magnet system. Kapton coil former
Tweeter : 25mm textile dome. Vented voice coil, ferro fluid cooled/damped
Crossover : 7 precision elements crossing over at 3KHz @18dB/octave
Sensitivity : 89dB S.P.L
Nominal Impedance : 8 ohms
Power Handling : 125 watts unclipped program
Recommended Amplifier Range : 25 ~ 150 watts/channel
Maximum SPL : 107dBA per pair @ 2m
Distortion @ 90dB SPLr : 2nd & 3rd Harmonic less than 1% (40Hz~20KHz)
Cabinet : High density particle board with internal braces
Grille : Low diffraction with black cloth
Finish : Walnut, Black Ash & Rosewood veneers
Connections : 4x4 Rogers gold-plated terminals with Bi-wire facility
Dimensions : 906mm high, 221 mm wide, 245mm deep (35.6" x 2.7" x 9.6")
Weight : 19kg (42lb) each
Recommended placement : placement (12") from rear wall, clear of side walls, angled in so axis cross just in front of the listener
 
* Design and specifications are subject to change without notice.



Copyright (c) 2001-2004 Rogers International Ltd. All Rights Reserved.